Table of Contents
Advertisement
4.
System Input Type
5.
System Output Type
6.
Input Voltage (%)
7.
Output Voltage (%)
8.
Output Load (%)
9.
DC Input Voltage (%)
10. Battery Voltage
11. Test Type
12. RSV
13. PASS
14. Trigger Source
Backup Records
This table lists the detail history of backup that has occurred on the UPS. The Log can store a maximum of 680
records. If more events are recorded, the new record replaces the oldest record.
1600XP Backup Record Log Format
•
Log Date – This field shows the date of the recording.
•
Log Time - This field shows the time that the values were recorded. Time is displayed in the hh:mm:ss 24-
hour format (i.e., 8:30 p.m. is 20:30:00).
•
Record Number - Maximum number of records is 255.
•
System Input Type
•
System Output Type
•
Input Voltage (%)
•
Output Voltage (%)
•
Output Load (%)
•
DC Input Voltage (%)
•
Battery Voltage start (%)
•
Battery Voltage end (%)
•
Trigger Source
•
Backup Duration
4200FA/4300 Backup Record Log Format
•
Log Date – This field shows the date of the recording.
•
Log Time - This field shows the time for backup record. Time is displayed in the hh:mm:ss 24-hour format
(i.e., 8:30 p.m. is 20:30:00).
•
Record Number - Maximum number of records is 255.
•
VBAT End – Battery Voltage recorded at the end of the event.
•
Factor – Description of the event that occurred.
•
Backup Time (Sec) – The amount of the time the UPS remained in battery backup.
Fault Records
This table lists the detailed history of faults that have occurred on the UPS. The Log can store a maximum of 680
records. If more events are recorded, the new record replaces the oldest record.
1600XP Fault Records Log Format
•
Log Date – This field shows the date of the recording.
•
Log Time - This field shows the time that the values were recorded. Time is displayed in the hh:mm:ss 24-
hour format (i.e., 8:30 p.m. is 20:30:00).
RemotEye III User Manual – 62330-005
85
Advertisement
Table of Contents
