Table of Contents
Advertisement
Description and function
6.1.2
Rotor backwinding unit
(ROLLANT 240/250/254/255)
Blockages in the bale chamber can be removed by
reversing the rotor (See section on "Manual rotor
reverse device").
Hydraulic rotor reverse device
(ROLLANT 254/255 with control panel)
The rotor can be hydraulically reversed to clear
blockages.
Hydraulic rotor reverse device from tractor
(ROLLANT 250/254/255)
The rotor can be hydraulically reversed to clear
blockages.
Bale chamber
The bale chamber is filled with loose crop by means of
the rotor of the cutting device and/or the feed rake.
The oscillating section is located at the upper part of
the baling chamber. When bale compaction starts, it
rises up and into the bale compaction chamber and
thus begins the rotation and compression of the bale at
2
an early stage as the chamber is filled (not for Rollant
240).
The material rotates inside the bale chamber, made up
of 16 steel rollers and is compressed layer by layer
into a round bale.
The round bale is then compressed from inside to
outside.
The oscillating section increases the pressure as it
presses on the surface of the bale and moves
outwards as the diameter of the bale increases (not for
Rollant 240).
Wrapping
When the bale has the required density, it is
automatically wrapped with net or twine. With net
wrapping, »automatic wrapping« or »manual
wrapping« operating modes can be chosen. The bale
is ejected into the field after the tailgate opens.
BA ROLLANT 240 - 250 - 254 - 255 - 000 299 119 5
Advertisement
Table of Contents
