Table of Contents
Advertisement
Safety precautions
•
BE EXTRA CAREFUL to keep hands, feet and
loose clothing away from moving parts.
•
READ THIS MANUAL and take note of ALL
safety precautions included herein.
Attention!
Do not remove, install or make repairs to a
tire on a rim. Take tire and rim to the
nearest available tire specialist, who have
experience and the safety tools. If the tire
is not correctly positioned on the rim, or
the tire pressure is too high then the tire
bead is liable to loosen on one side,
resulting in the pressured air to leak out at
high speed and with force. This can lead
to the risk of the tire flying off and causing
serious injury!
A tire can explode during inflation and
cause serious injury or death. Never
increase air pressure beyond 35 PSI to
seat the bead on the rim. Replace a tire if
it has a defect. Replace a wheel rim which
has cracks, wear or severe rust. Make
sure that all the air is removed from a tire
before removing the tire from the rim.
Never use force on an inflated or partially
inflated tire. Make sure the tire is correctly
seated before inflating.
Danger!
Check the machine for leaks or any parts
that are broken, not working correctly, or
missing. Before you start the machine,
tighten all caps, dipsticks, battery covers,
etc.
Never use gasoline, naphtha or any other
volatile material for any cleaning
purposes. These materials may be toxic
and/or flammable.
Use only metric tools. Other tools may not
fit properly. They may slip and cause
injury.
Danger!
Before leaving the tractor, stop the engine,
and remove the starter key. The gear shift
lever must be in neutral and the parking
brake engaged.
4.1.2
Attention!
To provide more secure hand and foot
mobility, preventing slipping and possible
injury, always face the machine when
mounting and dismounting.
Danger!
Never operate the engine in a closed
building. Proper ventilation is required
under all circumstances.
Contact with belts, chains etc. can cause
injury. Keep clear.
Attention!
To help prevent personal injuries during
operation and maintenance, loose shirts,
sleeves or jackets must never be worn by
the operator.
Danger!
Before starting the tractor, be sure all
operating controls are in neutral. This will
ease starting loads on the starter and
batteries of the tractor and will eliminate
the accidental start up of power driven
equipment.
Travel speed should be such that
complete control and machine stability is
maintained at all times. Where possible,
avoid operating near ditches,
embankments and holes. Reduce speed
when turning, crossing slopes, and on
rough, slick, or muddy surfaces.
Danger!
On highways use lighting equipment
according to local laws. Keep SMV
emblem clean and visible. Replace SMV
emblem when damaged or sun faded.
Stop, look and listen before entering
public thoroughfare or a highway.
BA ROLLANT 240 - 250 - 254 - 255 - 000 299 119 5
Advertisement
Table of Contents
