After using the baler
U
B
W
B
000 299 119 5 - BA ROLLANT 240 - 250 - 254 - 255
UNHITCHING THE BALER
Wheel chocks
Danger!
Before unhitching the baler place wheel
chocks in front of the wheels.
Remove the wheel chocks (U) from the holder on the
right side of the platform and place behind the tires to
secure the round baler against coasting.
1
(Fig. 1)
Parking support
Danger!
Always adjust the parking support to the
appropriate position before unhitching the
round baler (stability). Take care when
operating the parking support – risk of
squashing!
Loosen the bolt (B) and pull out. Pull out the parking
jack forwards.
2
Turn the parking support by 180 degree and push it
back in so that the bolt can be reinserted.
Secure the bolt.
Load the parking jack with the hand crank (W), until
the towing eye on the trailer bar on the tractor is free.
Attention!
Once the parking castors are under load, the
baler must not be moved. Otherwise the
castors could be damaged. To shunt the
baler, set the parking castors up.
3
(Fig. 2, 3)
After using the baler
13.1.1