Spring-Loaded Cylinder For Bale-Forming Roller Drive - Tailgate; Spring-Loaded Cylinder For The Bottom Bale-Forming Roller Drive; Adjusting The Spring-Loaded Cylinder For The Front Bale-Forming Roller Drive - Claas ROLLANT 240 Operating Instructions Manual

ROTOR MACHINE
REEL MACHINE
000 299 119 5 - BA ROLLANT 240 - 250 - 254 - 255
Spring-loaded cylinder for bale-forming roller
drive – tailgate
After loosening lock nut (K), adjust the guide tube (R)
so that the length of the loaded spring (X) is 140 mm
(5.51 inch).
Retighten the lock nut (K) after adjustment.
(Fig. 12)
12
Spring-loaded cylinder for the bottom bale-forming
roller drive
After loosening lock nut (K), adjust the guide tube (R)
so that the length of the loaded spring (X) is 140 mm
(5.51 inch) after the lock nut has been tightened.
(Fig. 13, 14)
13
14
Adjusting the spring-loaded cylinder for the front
bale-forming roller drive
After loosening lock nut (K), adjust the guide tube (R)
so that the length of the loaded spring (X) is 140 mm
(5.51 inch) after the lock nut has been tightened.
(Fig. 15)
15
Maintenance
14.3.5