Pick-Up In Float Position / Up; Engage / Disengage Knives; Rotor Reverse - Claas ROLLANT 240 Operating Instructions Manual

000 299 119 5 - BA ROLLANT 240 - 250 - 254 - 255

Pick-up in float position / up

Pick-up in float position: Hold the key
depressed and release after the second
bleep. The pick-up is in float position.
Pick-up up: Press the key once to deacti-
vate the float position. Hold the key
depressed a second time, until the desired
position is reached.
(Fig. 1)

Engage / disengage knives

Engage knives (cutting position)
Disengage knives
(Fig. 1)
Note!
If the voltage supply is interrupted both cutting
blades and hydraulic supply must be
reactivated.

Rotor reverse

Press "Engage knives" and "Disengage
knives" simultaneously to start a rotor
reversing cycle.
Note!
The reverse rotation device can be
operated a maximum of 3 times.
Then the machine must rotate
forwards again.
(Fig. 1)
Control Terminal
10.1.5