S
000 299 119 5 - BA ROLLANT 240 - 250 - 254 - 255
CLAAS COMMUNICATOR - operation
Bale output
Attention!
On slopes place the bales so that they
cannot roll away.
Automatic opening of tailgate
The »automatic opening of the tailgate« can be
selected in the adjustment menu.
After the bale is finished, the tailgate opens
automatically to enable the bale output. The tailgate
also closes automatically again.
Note!
It is always possible to override the opening of
the tailgate manually. To this end, just activate
9
key (S). This does not delete the function
»Automatic opening of tailgate« from the
memory of the CLAAS COMMUNICATOR.
Note!
Closing the tailgate is not possible when a bale
is blocked on the bale chute, i.e. when the
output ramp is int he bottom position.
(Fig. 9)
Opening the tailgate manually
If the function »automatic opening of tailgate« is not
activated, the tailgate must be opened manually.
Procedure:
Bale wrapping is finished, the symbol »Stop« is
displayed: the bale has to be discharged.
Press key (S) once to open the tailgate
completely.
Press key (S) and keep it pressed to
control the opening of the tailgate.
(Fig. 9)
11.6.9