External Gate Status Indication Led; Courtesy (Pillar) Light Timer (Optional Feature) - Centsys D5-Evo User Manual

5.1.13. External Gate Status Indication
A LED (Light Emitting Diode)
mounted on your intercom
allows you to view the position
of your gate and the condition of
the battery and power supply
features from the safety of your home.
and
The different signals of the LED
functions
are described below:
Off
On
Continuous slow flash
Continuous fast flash
One flash every two seconds
Two flashes every two seconds
Three flashes every two seconds
Four flashes every two seconds
5.1.14. Courtesy (Pillar) Light Timer
Courtesy (Pillar) Lights can be
connected through the controller
if a 220-240V power supply is
available at the gate. The lights
will switch on every time the
gate is given a signal to operate
and stay on for an adjustable
period of one second to ten
minutes (in increments of one
second) then automatically turn
off.
The purpose is to bathe your entrance with light when you open the
gates and increase your security as you drive into your property – it
also saves electricity as the lights only come on when you use the gate
motor.
Using the Pedestrian Opening feature will cause the Courtesy (Pillar)
Lights to flash three times before the gate opens.
If you choose not to fit a Gate Status Indicator, the Status LED
on the controller can also be used for trouble-shooting.
page 20
Gate is closed
Gate is partially or fully open
Gate is opening
Gate is closing
Courtesy (Pillar) lights on
No mains present
Battery voltage is low
Multiple collisions have occurred
(optional feature)
FIGURE 28
FIGURE 29