D10 Overview; D10 Turbo Overview - Centsys D5-Evo User Manual

D10 overview

The D10's 24V DC motor is coupled to the gearbox, resulting in a
combination of speed and power that can push up to a 1000kg sliding
gate – perfect for industrial sites such as business parks, housing
estates and factories. The precision machined, die cast aluminium
gearbox incorporates a self-locking gearset and not only makes short
work of massive gates, but the attempts of prospective criminals too.
Add the optional theft resistant cage and criminals will have to think
about a change of occupation. A 24V 7Ah battery supply with a switch
mode charger means your batteries are always full, but if you're still
hungry for power the battery capacity can be increased by using an
externally mounted unit. Similar to the D5-Evo, the D10/D10 Turbo
batteries can also be charged by a solar panel instead of a 220V mains
supply at the gate.
As with the D5 Evo, the D10/D10 Turbo controller with LCD interface
is a cinch to set up and it offers an equally impressive list of useful
features including CENSYS's ChronoGuard timer technology. Of course
accurate position control, sensitive anti-crushing and precision stopping
power come standard.

D10 Turbo overview

The D10 Turbo is perfectly suited for sites requiring a high number of
operations per day, and very fast opening and closing speeds, and can
reach almost double the speed of the standard D10. However, it is
recommended that gates weighing more than 240kg are not operated at
maximum speed, as the inertia generated by heavier loads might prove
detrimental to the gearbox at such high speeds.
page 3