Reversing Mode; Condominium Mode - Centsys D5-Evo User Manual

If you press the button again, while the gate is moving, the gate will
stop. Press the button for a third time and the gate will go into
reverse
Autoclose (page 11) and PIRAC (Beam Autoclose)
(page 14) can be used with Standard Mode. An infrared
safety beam needs to be installed across the gate
entrance and connected to the Closing Safety Beam input
on the D5-Evo or D10/D10 Turbo to use this function,
in order to prevent the gate from closing on people, pets
or vehicles. (Page 18)
 5.1.2.2. Reversing Mode
Reversing Mode offers slightly more security than Standard Mode
as it allows you to close your gate quickly by pressing, for
instance, your remote control just as you drive through the gate
to prevent children or pets running out - or anybody getting in
behind you
When pressing the button of the remote control or the gate / door
release pushbutton on the intercom, your gate will be set in
motion. If you press the button again, the gate will move in the
opposite direction. So, if the gate is opening and you press the
button, the gate will stop and immediately start to close (and vice
versa)
Autoclose (page 11) and PIRAC (Beam Autoclose)
(page 14) can be used with Reversing Mode. An infrared
safety beam needs to be installed across the gate
entrance and connected to the Closing Safety Beam input
on the D5-Evo or D10/D10 Turbo to use this function,
in order to prevent the gate from closing on people, pets
or vehicles. (Page 18)
 5.1.2.3. Condominium Mode
This mode is ideal for increased safety and security in multi-user
applications such as townhouses, estates, factories or office parks.
If you select Condominium Mode, your gate will open when
pressing the button of the remote control or the gate / door
release pushbutton on the intercom – but pressing the button
again while gate is opening will be ignored. It will not cause the
gate to stop or to reverse. Only the internal Autoclose described
on page 11 of this User Guide, which is automatically enabled, will
close the gate. If the button of the remote control or intercom
gate release is pressed while the gate is closing, the gate will
immediately reopen. The gate cannot be stopped in a midway
position and will therefore always close. If the button is pressed
while the gate is in the open position, the Autoclose timer (Page
11) is reset. Finally, the Autoclose Override feature described on
page 11 cannot be applied in this mode
page 9
Features
and
functions