Pirac Mode (Beam Autoclose) - Optional - Centsys D5-Evo User Manual

5.1.6. PIRAC Mode (Beam Autoclose Mode) - optional
This mode can be used in
Features
and
conjunction with any of the
functions
operating modes, Standard,
Condominium and Reversing.
With PIRAC Mode enabled, your
gate will close as soon as you
have driven through and passed
the safety beam – giving
intruders no time to follow
behind you.
If Autoclose is enabled and the
gate has been opened but
nothing moves through the
Closing Safety Beam, the gate
will stay fully open for the
duration of the Autoclose timer
before closing. However, if
something passes through the
Closing Safety Beam the gate
will close immediately.
If something crosses the beam
while the gate is opening, it will
continue to open until the beam
is cleared and the gate will then
stop and close. If the gate has
reached its fully open position, it
would stop and remain open
until the beam is cleared.
PIRAC mode's 'stop on opening'
configuration will open the gate
a short, adjustable distance past
the point at which the beam was
broken and stop, wait for the
beam to be re-made or the
Autoclose timer to expire, then
close.
This mode can only be used if a Closing Safety Beam
(page 18) is fitted
page 14
Gate
opening
Beam
FIGURE 17
Gate
opening
Beam
broken
FIGURE 18
Gate
closing
Beam
re-made
FIGURE 19