Some Examples Of How To Use Chronoguard - Centsys D5-Evo User Manual

 5.1.16.1. Some examples of how to use ChronoGuard:
 Pillar / Courtesy Lights could
Features
and
functions
 Time-bar prevents
 If your factory is particularly
be set to switch on at 20:00
in combination with Holiday
Lockout Mode so your
driveway would be lit up and
locked down to keep you
safe at night.
something from switching on
or being activated – so use
it to turn off functions like
Courtesy / Pillar Lights to
save electricity during the
day. Or de-activate the free-
exit loop at the exit to your
premises after hours and
over weekends.
Time-bar can also be used to limit access. For example, your staff
can get in on weekdays – but will be locked out over the weekend or
on public holidays for added security. However, there is only one
group that can be set up per input. So, if you want your gardener's
remote to be time-barred for a certain period and your maid's to be
barred for a different Time-period, you'll have to set the gardener's
remote to open using one input (like the operator) and the maid's
remote to trigger another input (like the keyswitch).
busy during certain hours of
the day from Monday to
Friday, set your operator to
keep the gates open during
these times to allow for
quick traffic flow. During any
other hour, or over the
weekend or public holidays,
you'll have to use your
CENTSYS access control
device (keypad, proximity
reader etc) to get in.
page 24
FIGURE 33
FIGURE 34
FIGURE 35