Chronoguard Timer (A World First) - Centsys D5-Evo User Manual

Another function provided with this receiver is the ability to record the
memory location of each remote control, mapping this to the name of
the owner of the remote (if recorded). This allows any transmitter that is
lost or stolen to be selectively erased from the system without affecting
any of the other remotes installed.
It is also possible to erase the functions of certain buttons on a remote
control if they're no longer required. Alternatively, the functionality of
certain buttons can be changed to trigger different functions.
At any stage remote controls can be selectively added, deleted or edited
within the system.
Contact your gate automation specialist or Centurion Systems (Pty) Ltd
for assistance.

5.1.16. ChronoGuard Timer (a world first)

ChronoGuard™ (a world first) is a powerful multichannel timer feature
which has been added to the D5-Evo, D10 and D10 Turbo controllers.
A Real Time Clock and Calendar (RTC) lets you set the following features
to operate automatically or be prevented from operating (time-barred)
during any Time-period you choose:
 Trigger (TRG) (auto activation and time-bar)
 Free-exit (FRX) (auto activation and time-bar)
 Pedestrian opening (PED) (auto activation and time-bar)
 Holiday Lockout (LCK) (auto activation and time-bar)
 Closing Beam (IRBC) (auto activation only)
 Courtesy (Pillar) Light control (AUX) (auto activation and time-bar)
 Courtesy (Pillar) Light relay (time-bar only)
 Auxiliary output (auto activation and time-bar)
It is possible to time-bar the operation of the device physically wired to this feature and/or
the same feature controlled via the radio receiver.
Spare output, which via a relay board can drive a variety of external devices such as
sprinkler system, fountain etc.
A Time-period can be a once off event, or can be set to repeat on a
weekly or annual basis. The weekly repeat can be chosen to occur on
every day of the week, weekdays only, weekends only, or any specific
day. The minimum duration of a Time-period is one minute – and you
can set 100 different Time-periods. The "Tp" icon will appear on the
display to indicate that a Time-period is active.
You can even set up different conditions by combining Time-periods as
well as set up exclusions (once off Time-periods when the auto
activation or time-bar period must be ignored) so your gate will
automatically open at certain times on weekdays, but will know not to
open on a public holiday.
page 23
Features
and
functions