The Display And It's Symbols; The Computer Housing; Quick Start; Basic Values And Settings - Energetics E-202 Instruction Manual

The display and it's symbols

(D1) Main Display – scanning through various settings and important values
(D2) STOP – data collection interrupted, no activity
(D3) blinking: transmission of heart rate active

(D4) SCAN – data collection active
(D5) TIME – training session (minutes)
(D6) SP – speed (kilometre/hour)
(D7) DIST – distance covered in kilometres
(D8) CAL – calories used measured in kilocalories
(D9) ODO – total distance in kilometres
(D10) PULSE – current heart rate in beats per minute
(D11) K – unit used for measurement (kilometre) or kilometre/hour

The computer housing

Front
(C1) Display – shows all important measured and calculated values and functions
(C2) MODE – scans through a variety of display functions during the
work out
(C3) SET – confirm the selection of a program or value
(C4) RESET
• brief key touch: reset chosen value (to 0)
• long key touch (min . 2 seconds): reset all function, the computer restarts,
information not saved is lost
Back
(C5) PULSE INPUT – connector for the hand pulse sensors of your device
(C6) Battery compartment
(C7) Insert mount – mount to attach the computer with tapped holes for the fixing bolts
(C8) Connecting cable – data line
2
[» 1] Quick start
Press any function key . The computer will sound a beep tone and start automatically with the preset values .
Start to pedal . The display will scan through the current values of the various read outs: workout time (TIME),
calories used (CAL), travelled total kilometres (ODO), speed (SP), workout distance (DIST) and while holding the
handpuls sensors your current heart rate (PULSE) .
Start the workout, select a program, input individual settings
To start you proper training and input your individual settings, press the MODE-key until the appropriate setting
function is reached .
Carefully read this manual and input the desired settings .
!
Reset all settings – RESET
To return the computer to its original settings press the function key RESET 2 seconds until
you hear the beep tone and the original values are displayed.

Basic values and settings

Explanation
Workout time
Setting/shows workout time in minutes .
(TIME)
Workout distance
Setting/shows workout distance in kilometres .
(DIST)
Calories used
Setting/shows calories used in kilocalories during the workout session .
(CAL)
Heart rate
Setting/shows heart rate in beats per minute .
(PULSE)
Speed
Read out of the current speed in kilometres per hour (kph) .
(SP)
ODO
Read out of total kilometres travelled (km) .
Adjustable
yes
yes
yes
no
no
no