ADT Safewatch Pro 3000 Installaton Manual page 70

Safewatch Pro 3000 Installation Instructions
Alpha Display
Modem Comm
no display
Comm. Failure
Open Circuit
Long Rng Trbl
Bell Failure
RCVR Jam
KEYPAD LOW BAT
Phone Okay
Test in Progress
Upload Completed
Upload Failed
12-4
Fixed Disp. Meaning
CC
The system is in communication with the central station for change of function or
status verification.
no display
Power Failure
If there is no touchpad display at all and the LEDs are unlit, operating power (AC
and battery) for the system has stopped and the system is inoperative.
If the message "AC LOSS" (Custom English display touchpads) or "NO AC"
(English display touchpads) is displayed, the touchpad is operating on battery
power only.
If the battery standby capacity is used up during a prolonged AC power outage,
the control's power will shut down to minimize deep discharge of the battery.
FC
A communication failure has occurred.
OC
The touchpad is not receiving signals from the control and sees an open circuit.
bF
Backup LRR communication failure.
70 Bell supervision failure.
90 RF jam detected.
00 BAT
Wireless touchpad low battery
dO
the dialer test has been successful
dd
Walk test mode is active
dC
the upload or download session was completed
dF
the upload or download session failed before completion