ADT Safewatch Pro 3000 Installaton Manual page 78

Safewatch Pro 3000 Installation Instructions
Model Product
5801 Wireless
Panic
Transmitter
5802 Pendant
(Personal
Emergency
Transmitter)
5802CP Belt Clip
(Personal
Emergency)
5802MN Miniature
(Personal
Emergency
Transmitter)
5804 Wireless Key
Transmitter
5804BD Bi-
Directional
Wireless Key
5806 Wireless
Photoelectric
5807
Smoke
5808
Detectors
5809 Heat
Detector
5816 Door/Window
Transmitters
5816MN
5816 Low-
Temperature
TEMP
Sensor
5817 Multi-Point
Universal
Transmitter
5816 Recessed
Transmitter
14-4
Compatible 5800 Series Transmitters Table
Also refer to Appendix A for transmitter input loops/button locations.
Enter as
Input Device
Type
UR or RF
BR Only
BR Only
UR or RF
BR Only
BR
RF
RF
RF
RF
RF
RF
Description
•
Has four pushbuttons, each with a unique input (loop)
code.
•
Programmable responses (e.g., Panic, Arm-Stay, Arm-
Away, Disarm, etc.)
•
Has single pushbutton.
•
Usually programmed for response type of 24-Hr audible or
24-Hr Silent (other zone responses are possible).
Same as 5802.
•
Has single pushbutton.
•
Usually programmed for a response type of 24-Hr Audible
or 24-Hr Silent (other zone responses are possible).
•
Has four pushbuttons, each with a unique input (loop)
code.
•
Programmable responses (e.g., Arm-Stay, Arm-Away,
Disarm, etc.)
•
House ID must be set.
•
Requires 5800TM Transmitter Module.
•
Can indicate system status via its 2 LEDs and built-in
sounder.
•
Has four pushbuttons, each with a unique input (loop)
code.
•
Operates the system similarly to wired touchpads.
One-piece smoke detectors with a built-in transmitter.
One-piece rate-of-rise heat detector with a built-in transmitter.
Has two unique input (loop) codes: one for a wired closed
circuit contact loop; the other for a built-in reed switch (used
with a magnet).
Transmits a fault condition when temperature drops below
45°F.
Has three unique input (loop) codes: one for a "Primary"
contact loop with programmable options; the others for two
"auxiliary" closed circuit contact loops.
•
Reed switch magnetic contact sensor; easily hidden in the
frame and edge of a door or window.
•
Has a single unique input (loop) code.