Touchpad Functions - ADT Safewatch Pro 3000 Installaton Manual

Safewatch Pro 3000 Installation Instructions

Touchpad Functions

The following is a brief list of system commands. For detailed information concerning system
functions, refer to the User's Manual.
Function
Silence alarms
Quick Arm
Single-Button arming
Alarm Memory
Arming Away
Arming Stay
Arming Instant
Disarming
Bypassing Zones
Forced (Quick) Bypass
Chime Mode
Activate Output Devices
12-2
Description
Pressing any key will silence the touchpad sounder for 10 seconds. Disarming the
system will silence both touchpad and external sounders.
If enabled (field 21), you can press [#] in place of the system's security code, plus the
desired arming key (Away, Stay, Instant)
If programmed (*57 Function Key menu mode), lettered keys A-D can be used for
arming, using options 3-AWAY, 4-STAY, 5-NIGHT-STAY, or 6-Step-Arming
If used, no security code is required to arm the system.
When the system is disarmed, any zones that were in an alarm condition during the
armed period will be displayed. To clear this display, simply repeat the disarm
sequence (enter the security code and press the OFF key) again.
Enter code + AWAY [2] or simply press appropriate lettered key on the touchpads (see
"Single-Button Arming" above)
Enter code + STAY [3] or simply press appropriate key on the touchpads (see "Single-
Button Arming" above).
Enter code + INSTANT [7]
Enter code + OFF [1].
Enter code + BYPASS [6] + zone number(s).
To automatically bypass all faulted zones, use the "Quick Bypass" method. Enter code
+ BYPASS + [#], then wait for all open zones to be displayed. Arm when display
indicates "BYPASS" and "READY TO ARM".
Enter code + CHIME [9]. To turn chime off, enter code + CHIME again.
If relay outputs (via a 4204, or 4229), or Powerline Carrier devices are used, two
touchpad entries available to the user are included. If programmed, these entries can be
used to manually activate or deactivate the device(s) for starting or stopping some
action, such as turning lights on or off, etc. These touchpad entries are:
[Security Code] + # + 7 + [2-digit Device #] activates (starts) that device.
[Security Code] + # + 8 + [2-digit Device #] deactivates (stops) that device.
SUMMARY OF ARMING MODES
Arming Exit Delay
Mode
AWAY Yes
STAY Yes
INSTANT Yes
Features for Each Arming Mode
Entry Delay Perimeter Armed
Yes
Yes
No
Interior Armed
Yes Yes
Yes No
Yes No