Operating Settings Configuration; Home Screen; Test Mode; Auto Test - Chauvet Maverick MK2 Wash User Manual

Operating Settings Configuration

Home Screen

The Maverick MK2 Wash has a home screen that shows the current control protocols, personalities,
starting addresses, IP addresses, and universes. To see the home screen, press <MENU>
repeatedly until it shows on the display. From the home screen, touch any of the displayed control
settings to immediately jump to that part of the menu, such as the personality, starting address, or
universe, or press <ENTER> to reach the main menu.

Test Mode

To perform an auto test of the Maverick MK2 Wash functions, follow the instructions below:

Auto Test

1.
2.
3.
4.
5.

Manual Test

To test the functions of the product manually, do the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.

Setup

To reach the Setup menu, follow the instructions below:
1.
2.
3.

Network Settings

Ethernet To DMX The Maverick MK2 Wash can convert a single ethernet input signal to a single DMX output signal.
To activate or deactivate the Ethernet to DMX function, do the following:
1.
2.
3.
4.
5.
6.
7.
Maverick MK2 Wash User Manual Rev. 1
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test Mode, or touch the display where it
says Test Mode.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Auto test, or touch the display where it says Auto test.
Press <ENTER>.
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test Mode, or touch the display where it
says Test Mode.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Manual test, or touch the display where it says Manual test.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select the function to test, from Pan, Tilt, P/S Speed, Red, Green,
Blue, White, CTC, Color, Pattern, LED Macro, LED Ma. Speed, LED Ma. Fade, Background,
Background Dim., Dimmer, Shutter, Function, or Zoom, or touch the display where it says
the desired function.
If using the buttons instead of the touchscreen, press <ENTER>.
Change the value of the tested function with one of the following methods:
·
Type the desired value using the number pad that shows on the touchscreen display.
or
·
Use <UP>, <RIGHT>, <DOWN>, or <LEFT> to increase or decrease the value.
Press <ENTER>.
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Setup, or touch the display where it says
Setup.
If using the buttons instead of the touchscreen, press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Network Settings, or touch the display where it says Network
Settings.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Ethernet To DMX, or touch the display where it says Ethernet
To DMX.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (deactivate) or YES (activate), or
touch the display where it says the desired setting.
Press <ENTER>.
Operation
-33-