Operation; Control Panel Operation; Control Options; Programming - Chauvet Ovation F-145WW User Manual

Table of Contents

Advertisement

Operation

4. Operation

Control Panel Operation

Button
Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently selected value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric value when in a function
<DOWN> Navigates downward through the menu list or decreases the numeric value when in a function
Knob 1 Push then turn to increase or decrease the dimmer
Knob 2 Push then turn to increase or decrease the zoom

Control Options

Set the Ovation F-145WW starting address in the 001–512 DMX range. This enables control of up to 102
products in the 6-channel 6Ch: 16bit-Full personality.

Programming

Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will take you to the first programming level for that option.
To select an option or value within the current programming level, press <UP> or <DOWN> until
the option shows on the display. Press <ENTER> to select. In this case, if there is another
programming level, you will see that first option, or you will see the selected value.
Press <MENU> repeatedly to exit to the previous main level.

Configuration (DMX)

Use control configurations to operate the product with a DMX controller.

Control Personalities

This setting allows you to choose a particular control personality.
1.
Go to the DMX Personality main level.
2.
Select the desired personality (see table below).
See the

Starting Address

Make sure that the starting addresses on the various products do not overlap due to the new
personality setting.
Starting Address
Each product will respond to a unique starting address from the DMX controller. All products with the same
starting address will respond in unison.
1.
Go to the DMX Address main level.
2.
Select the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
Ovation F-145WW User Manual Rev. 5
Personality
1Ch: 8bit Dim
2Ch: 16bit Dim
2Ch: 8bit Dim+Zoom
6Ch: 16bit-Full
section for the highest starting address you can select for each personality.
Personality
1Ch: 8bit Dim
2Ch: 16bit Dim
2Ch: 8bit Dim+Zoom
6Ch: 16bit-Full
Channels
1
2
2
6
Address
512
511
511
507
Page 7 of 15

Advertisement

Table of Contents
loading

Table of Contents