Backlight Timer; Loss Of Data; Fan Speed; Color Mixing Mode - Chauvet Maverick MK2 Wash User Manual

Backlight Timer

To set the amount of time after inactivity before the display backlight turns off:
1.
2.
3.
4.
5.

Loss of Data

In case of an input signal being lost in any way, the Maverick MK2 Wash will respond in one of two
ways. the product will either hold the last signal received, or black out all LED output.
To set which way the product responds, follow the instructions below:
1.
2.
3.
4.
5.

Fan Speed

To set the speed of the fans, do the following:
1.
2.
3.
4.
5.
The Maverick MK2 Wash has an additive color mixing mode, and a subtractive color mixing mode. In
Color Mixing
the additive color mixing mode, a value of 000 on a color LED channel gives zero output, and a
Mode
value of 255 on that channel gives full output. In the subtractive color mixing mode, a value of 000
on a color LED channel gives full output, and a value of 255 on that channel gives zero output.
To set the color mixing mode:
1.
2.
3.
4.
5.

Dimmer Curve

To set the dimmer curve, follow the instructions below:
1.
2.
3.
4.
5.

Dimmer Speed

To set the dimmer speed, do the following:
1.
2.
3.
4.
5.
Maverick MK2 Wash User Manual Rev. 1
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Backlight Timer, or touch the display where it says Backlight
Timer.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select 30S (after 30 seconds of inactivity), 1M
(after 1 minute of inactivity), 5M (after 5 minutes of inactivity), or ON (does not turn off), or touch
the display where it says the desired option.
Press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Loss of Data, or touch the display where it says Loss of Data.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Hold (hold last signal received) or Close
(black out all LED output), or touch the display where it says the desired option.
Press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Fans, or touch the display where it says Fans.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Auto (fan speed set according to product
temperature), Full (maximum speed), or ECO (quiet fans mode), or touch the display where it
says the desired option.
Press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select C Mixing Mode, or touch the display where it says C Mixing
Mode.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select RGBW (additive color mixing), or CMY
(subtractive color mixing), or touch the display where it says the desired option.
Press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Dimmer Curve, or touch the display where it says Dimmer
Curve.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Linear, Square, I Squa, or SCurve, or
touch the display where it says the desired option.
Press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Dimmer Speed, or touch the display where it says Dimmer
Speed.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Smooth or Fast, or touch the display
where it says the desired option.
Press <ENTER>.
Operation
-37-