Dual Control Pixel; Dual Control Pixel Protocol; Dual Control Pixel Personality; Dual Control Pixel Start Address - Chauvet Maverick MK2 Wash User Manual

Dual Control The Pixel protocol controls the individual output of the LEDs. Choose from DMX, Art-Net™, sACN,
or Kling-Net. In this mode, the three personalities available are Basic (36 channels), Standard (48
Pixel
channels), and Advanced (96 channels).

Dual Control Pixel

To select the Dual Control Pixel protocol, follow the instructions below:
Protocol 1.
2.
3.
4.
5.
6.
7.
8.
9.
Dual Control Pixel
To select the Dual Control Pixel personality, set the Protocol, then do the following:
Personality 1.
2.
3.
4.
Kling-Net can only be assigned the Basic and Standard personalities.
Dual Control Pixel To set the starting address of the Dual Control Pixel mode, set the Protocol, then follow the
Start Address instructions below:
1.
2.
3.
4.
Dual Control Pixel To set the Universe address of the Dual Control Pixel mode when using Art-Net™ or sACN, set the
Universe Protocol to ArtNet or sACN, then do the following:
1.
2.
3.
4.
Maverick MK2 Wash User Manual Rev. 1
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Control Settings, or touch the display
where it says Control Settings.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Dual Control, or touch the display where it says Dual Control.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Pixel, or touch the display where it says Pixel.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from DMX, ArtNet, sACN, or KlingNet, or
touch the display where it says the desired protocol option.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Personality, or touch the display where it says Personality.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from Basic (36-channel), Standard (48-
channel), or Advanced (96-channel), or touch the display where it says the desired personality.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Start Address, or touch the display where it says Start
Address.
If using the buttons instead of the touchscreen, press <ENTER>.
Enter the starting address (001–512) with one of the following methods:
·
Type the address number using the number pad that shows on the touchscreen display.
or
·
Using the buttons (or the button icons on the sides of the display),
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the address is set as desired.
Press <ENTER>.
Use <UP> or <DOWN> to select Universe, or touch the display where it says Universe.
If using the buttons instead of the touchscreen, press <ENTER>.
Enter the universe address (0–254 for ArtNet, 0–255 for sACN) with one of the following
methods:
·
Type the universe number using the number pad that shows on the touchscreen display.
or
·
Using the buttons (or the button icons on the sides of the display),
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the universe is set as desired.
Press <ENTER>.
Operation
-15-