Table of Contents
Advertisement
Operation
4. Operation
Control Panel Operation
Button
Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently selected value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric value when in a function
<DOWN> Navigates downward through the menu list or decreases the numeric value when in a function
Protocol Configuration
The COLORado PXL Curve 12 can be set to respond to DMX, Art-Net™, sACN, Kling-Net, or a
combination of these protocols. The protocol configuration must be set for the product to respond correctly
to the controller(s).
Control Mode
The COLORado PXL Curve 12 can work with a single controller or with 2 controllers running 2 different
control protocols. In Dual Control mode, one protocol controls the Movement, and the other protocol
controls the Pixels.
•
Single Control mode works with wired DMX, Art-Net™, and sACN control signals.
•
Dual Control Movement works with wired DMX, Art-Net™, and sACN control signals.
•
Dual Control Pixels works with wired DMX, Art-Net™, sACN, and Kling-Net control signals.
To set the control mode and the protocol(s):
1. Go to the Address main level.
2. Select the desired control mode between Single Control and Dual Control.
3. For Dual Control, select which mode to configure between Movement and Pixels.
4. Select the desired protocol, from DMX, ArtNet, sACN, or KlingNet (Dual Control Pixels only).
In Dual Control mode, the Movement protocol and the Pixels protocol cannot be the same.
See the
Network Settings
Control Personalities
To set the control personality:
1. Select the control mode and protocol as described under
2. Select the Personality option.
3. Select the desired personality from:
Single Control
Basic (20 channels)
Standard (101 channels)
Advanced (155 channels)
Advanced2 (169 channels)
Tour (179 channels)
Basic2 (53 channels)
•
See the
Starting Address
personality.
•
Make sure that the starting addresses on the various products do not overlap due to the
new personality setting.
COLORado PXL Curve 12 User Manual Rev. 4
section for further setup of ethernet protocols (Art-Net™ or sACN).
Dual Control Movement
Basic (8 channels)
Standard (53 channels)
Advanced (59 channels)
Basic2 (41 channels)
section for the highest recommended address for each
Control
Mode.
Dual Control Pixels
Basic (36 channels)
Standard (48 channels)
Advanced (96 channels)
*Kling-Net will only function with
Basic or Standard mode
11
Advertisement
Table of Contents
