Touchscreen Lock; Lock Screen; Swap Pan And Tilt; Pan/Tilt Speed - Chauvet Maverick MK2 Wash User Manual

Operation
Touchscreen To lock or unlock the touchscreen for the control panel, do the following:
1.
Lock
2.
3.
4.
5.

Lock Screen

To completely lock or unlock the control panel, follow the instructions below:
1.
2.
3.
4.
5.
To access the control panel when it has been locked:
1.
2.
3.
To switch the pan and tilt functions so that what normally controls the pan controls the tilt and what
Swap Pan and
normally controls the tilt controls the pan, do the following:
Tilt
1.
2.
3.
4.
5.
To set the maximum speed of the pan and tilt:

Pan/Tilt Speed

1.
2.
3.
4.
5.

WDMX Reset

To reset the WDMX connection from the Maverick MK2 Wash, do the following:
1.
2.
3.
4.
5.
-36-
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Touchscreen Lock, or touch the display where it says

Touchscreen Lock.

If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display will respond to touch) or YES
(display will not respond to touch), or touch the display where it says the desired option.
Press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Lock Screen, or touch the display where it says Lock Screen.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (control panel will not lock) or YES
(control panel will require a passcode to access), or touch the display where it says the desired
option.
Press <ENTER>.
Press <MENU>.
Enter the passcode 0920 using one of the following methods:
·
Through the touchscreen: use the number pad on the screen to enter 0920.
·
With the buttons:
a. Use <DOWN> to select the number to be changed.
b. Use <UP> to increase the value.
c. Repeat until 0920 has been entered.
Press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Swap XY, or touch the display where it says Swap XY.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal pan and tilt) or YES (pan
controls tilt, tilt controls pan), or touch the display where it says the desired option.
Press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select XY Mode, or touch the display where it says XY Mode.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Slow or Fast, or touch the display where
it says the desired option.
Press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select WDMX Reset, or touch the display where it says WDMX
Reset.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset connection) or YES
(reset the connection), or touch the display where it says the desired option.
Press <ENTER>.
Maverick MK2 Wash User Manual Rev. 1