Mounting; Orientation - Chauvet Maverick MK2 Wash User Manual

Setup

Mounting

Orientation

Mounting Diagram
-6-
Before mounting this product, read and follow the Safety Notes. For our CHAUVET
Professional line of mounting clamps, go to http://trusst.com/products/.
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance. The Maverick MK2 Wash can be suspended
upright or upside down using the 2 Omega brackets included, or it can be placed on its rubber
feet on a flat level surface.
Chauvet recommends using the following general guidelines when mounting this product:
·
When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
·
The product is not intended for permanent installation.
·
Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
·
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
·
If hanging this product, make sure that the mounting location can support the product's
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
·
When hanging this product, always secure to a fastening device using a safety cable. For
our CHAUVET Professional line of safety cables, go to http://trusst.com/products/.
·
When mounting the product on the floor, make sure that the product and cables are away
from people and vehicles.
·
Place the Maverick MK2 Wash so that it can move freely without hitting anything or
anybody.
·
Leave enough slack on the cabled to prevent tension and pull on the plugs.
Overhead Mounting
Mounting Clamp
Omega Bracket
Safety Cable
Rubber Feet (x4)
Floor Mounting
Maverick MK2 Wash User Manual Rev. 1