Firmware Update - Chauvet Maverick MK2 Wash User Manual

Hide thumbs Also See for Maverick MK2 Wash:

Table of Contents

Firmware Update

5. F

IRMWARE

The following steps apply to the Windows® 7 operating system:

Step 1

Connect the Maverick MK2 Wash to a computer

with an ethernet cable.

Verify the network with the Maverick MK2 Wash is

connected to the computer.

Step 2

Set the control protocol on the Maverick MK2

Wash to ArtNet in Single Control mode. (See

Single Control Protocol)

Set the IP Mode to Static. (See IP Mode)

Step 3 On the computer, open the Network and Sharing

Center (through the Start Menu, the Control Panel, or

the Network icon on the right side of the Taskbar).

Step 4 Select the network which the product is connected to

by clicking the blue text that corresponds to that

network on the right side of the window.

-40-

PDATE

Maverick MK2 Wash User Manual Rev. 1

Table of Contents