Chauvet Maverick MK2 Wash User Manual page 46

Firmware Update
Step 8 1. View the Home Screen on the Maverick MK2
Wash. (see Home Screen)
2. Open the internet browser on the computer.
3. Enter the IP address from the Maverick MK2
Wash display into the URL bar of the internet
browser. (For example, if the display of the
product reads 2.11.0.1, enter 2.11.0.1 into the
URL bar of the internet browser.)
Step 9 On the Welcome screen:
1. Enter admin as both the User Name and
Password. No capital letters.
2. Press Log In on the screen, or <Enter> on the
keyboard.
If the user name and password do not work, reset the
product to factory defaults. (see Factory Reset)
Step 10 On the page that appears, click Upgrade.
Step 11 Find the latest Firmware Upgrade on the website at
https://www.chauvetprofessional.com/products/maveri
ck-mk2-wash under DOWNLOADS.
Step 12 1. Click Choose File on the Maverick MK2 Wash
Upgrade page.
2. In the File Explorer window that pops up, select
the Firmware Upgrade file from the website and
click Open.
3. Click Upload File.
A Downloading message will appear on the product's
display. Once the product finishes installing the
firmware, it will reset.
Do NOT turn the product off during this process.
Step 13 On the Maverick MK2 Wash, verify the firmware has
been updated by navigating to Sys Info (System
Information) and checking that the version number
matches the name of the file on the computer.
Step 15 Disconnect the Maverick MK2 Wash from the computer. The firmware update is complete.
The examples shown are for illustrative purposes.
-42- Maverick MK2 Wash User Manual Rev. 1