Dual Control; Dual Control Movement; Dual Control Movement Protocol; Dual Control Movement Personality - Chauvet Maverick MK2 Wash User Manual

Operation

Dual Control

In Dual Control mode, the Maverick MK2 Wash is controlled by two protocol inputs. One controls the
movement of the yoke and zoom, as well as the dimmers and shutter, while the other controls the
individual LED output.
Dual Control The Movement protocol controls the movement of the yoke and zoom, as well as the dimmers and
shutter. Choose from DMX, Art-Net™, or sACN. In this mode, the three personalities available are
Movement
Basic (8 channels), Standard (20 channels), and Advanced (26 channels).
Dual Control To select the Dual Control Movement protocol, follow the instructions below:
Movement 1.
Protocol 2.
3.
4.
5.
6.
7.
8.
9.
Dual Control To select the Dual Control Movement personality, set the Protocol, then do the following:
Movement 1.
Personality
2.
3.
4.
Dual Control To set the starting address of the Dual Control Movement mode, set the Protocol, then follow the
Movement instructions below:
Start Address 1.
2.
3.
4.
Dual Control To set the Universe address of the Dual Control Movement mode when using Art-Net™ or sACN,
Movement set the Protocol to ArtNet or sACN, then do the following:
Universe 1.
2.
3.
4.
-14-
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Control Settings, or touch the display
where it says Control Settings.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Dual Control, or touch the display where it says Dual Control.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Movement, or touch the display where it says Movement.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from DMX, ArtNet, or sACN, or touch the
display where it says the desired protocol option.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Personality, or touch the display where it says Personality.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from Basic (8-channel), Standard (20-
channel), or Advanced (26-channel), or touch the display where it says the desired personality.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Start Address, or touch the display where it says Start
Address.
If using the buttons instead of the touchscreen, press <ENTER>.
Enter the starting address (001–512) with one of the following methods:
·
Type the address number using the number pad that shows on the touchscreen display.
or
·
Using the buttons (or the button icons on the sides of the display),
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the address is set as desired.
Press <ENTER>.
Use <UP> or <DOWN> to select Universe, or touch the display where it says Universe.
If using the buttons instead of the touchscreen, press <ENTER>.
Enter the universe address (0–254 for ArtNet, 0–255 for sACN) with one of the following
methods:
·
Type the universe number using the number pad that shows on the touchscreen display.
or
·
Using the buttons (or the button icons on the sides of the display),
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the universe is set as desired.
Press <ENTER>.
Maverick MK2 Wash User Manual Rev. 1