Chauvet Maverick MK2 Wash User Manual page 45

Step 5 Click Properties on the Status window that pops up.
Step 6 On the Properties window:
1. Click on Internet Protocol Version 4 (TCP/IPv4)
to select it.
2. Click Properties.
Step 7 On the TCP/IPv4 Properties window:
1. Select Use the following IP address:
2. Type 2.255.0.0 into the IP address bar.
3. Press <Tab> on your keyboard. The Subnet
mask bar should automatically populate as
255.0.0.0. If not, then enter it manually.
4. Ignore the Default gateway bar.
Maverick MK2 Wash User Manual Rev. 1
Firmware Update
-41-