About This Manual - FOR-A MFR-1616 Operation Manual

 Tally Manager Unit
ITEM
MFR-TALM
AC Adaptor
AC cable
DC cable retaining clip
Rack Mount Brackets
(optional)
Check
Check to ensure no damage has occurred during shipment. If damage has occurred, or items
are missing, inform your supplier immediately.
Installing the AC Cable Retaining Clip (Main Unit)
Secure the AC cable with the supplied AC cable retaining clip to prevent accidental removal
from the unit.
Procedure
1) Securely plug the AC cable into the AC connector.
2) Attach the Retaining clip on to the side of the AC cable.
3) Thread both ends of the retaining clip into the holes of the retaining clip base attached on the
unit.
Installing the DC Cable Retaining Clip
Install the supplied retaining bracket onto the rear panel of devices, such as a Control Unit as
shown below.
1) Bundle the cable with
the supplied clip.
2) Secure the clip with
the supplied screw.

About This Manual

This manual is intended to help the user easily operate this product and make full use of its
functions during operation. Before connecting or operating your unit, read this operation manual
thoroughly to ensure you understand the product. After reading, it is important to keep this
manual in a safe place and available for reference.
Font Conventions
The following conventions are used throughout this manual:
 Shaded text (such as OFF) indicates the setting parameters or values in the menu.
 Text enclosed by a square (such as MODE, SALVO) indicates remote control panel
buttons.
QTY
1
1
1
1 set
Single- or Dual-unit type
1 set
EIA standard type
6
REMARKS