Mode Button And Mode Menu (Mfr-39Ru/18Ru); Outline; Mode Menu - FOR-A MFR-1616 Operation Manual

 Destination Button LCD Indication
Usually destination channel names are displayed on the LCD above the destination buttons.
The MFR-18RU can also display source channel names that are selected for destinations. To
display source channel names, set the menu under Display Setting in the [Web-based Control:
RU Settings page].
In the case of breakaway switching with multiple levels, the name of the level with the smallest
number will be displayed.
POW ER
BUSY SETUP
LOCK RESET

5-3. MODE Button and Mode Menu (MFR-39RU/18RU)

5-3-1. Outline

The MODE button allows you to select different setting modes. As the setting mode changes
available items on the MENU and LCD displays and for the control knob change.
(Supported only for MFR-39RU/18RU.)
Modes are selectable to assign. Assign only necessary modes to allow for easier searches.
Multiple buttons can be assigned to MODE buttons. If multiple MODE buttons are assigned,
the MODE button will be highlighted (the text background illuminates) when it is pressed.

5-3-2. Mode Menu

The Mode menu has 5 mode options. In Setting mode, setting options are different in the
MFR-39RU and MFR-18RU.
(The menu display and control knob setting mode are supported only for MFR-39RU.)
 Destination Mode
Displays the current destination channel and its level.
The destination and level names are also shown in brackets.
The button indicates the current destination channel name.
To change the destination channel, turn the control knob to select a desired channel.
 Source Mode
Displays the source channel for the current destination.
The source name is also shown in brackets.
The button indicates the source channel name.
To change the source channel, turn the control knob to select a desired channel and press
the knob to confirm the selection.
DST : 1 [DST1
LVL : 0001 [Level-1
Menu display
SRC : 1 [SRC1
Menu display
]
]
Button LCD
]
Button LCD
45
MFR-18RU
REMOTE CONTROL UNIT