Function Buttons - FOR-A MFR-1616 Operation Manual

5-2. Function Buttons

Functions that are assignable to Remote control panel buttons are as shown in the below table.
Normally, functions are assigned via Web-based Control. (See "Assign Function" in Web-based
Control) MFR-39RU menu display is enabled to assign functions. (See 5-3-3-12. "BTN
ASSIGN.") MFR-16RUD can locall assign functions using the displa . (See section 5-4-2.
"Button Assignment Change".)
Button
Function
indication
None
Destination
Source
Bus
PAGE
MODE
LOCK
LOCAL
Description
No function is assigned.
Allows you to change a destination to the destination
specifically assigned to the button.
Allows you to change a source to the source specifically
assigned to the button.
Allows you to change a source to the source specifically
assigned to the button for a destination of the
source-destination assignment of the button.
Allows you to change pages to be displayed to a
specific, next or previous page.
There is a menu that allows you to select whether to
return to the previously displayed page or to display the
next specified page.
Target group(s) is displayed on the bottom of the button
indication.
 Button indications (from the top to the bottom)
PAGE JUMP (single) Switches the page to 1
for Group B.
PAGE JUMP (multi) Switches the page to 1
for Group A and C.
PAGE JUMP (all) Switches the page to 1
for all groups.
PAGE UP (single) Moves the page forward by 1
for Group A.
PAGE DOWN (all) Moves the page backward by 1
for all groups.
Allows you to change mode menus.
Mode function can be assigned to either one or multiple
buttons. One button assignment allows you to change
modes one by one by every press.
To assign modes to respective buttons, select modes in
the BTN ASIGN menu.
 Button indications
From the top to the bottom
Destination mode
Source mode
Level mode
Page mode (PAGE_Grp-All / A / B / C)
* The example at left shows the PAGE_Grp-All mode
Setting mode
* Supported for MFR-39RU and MFR-18RU.
Allows you to enable or disable Local Lock for source
selection included operations.
43
Reference
6-1-1
6-1-1
6-1-2
5-1-2
5-3
6-3-1