5. Remote Control Panel Operation
5-1. Basic Operation
This section describes basic operation of the remote control panel and how to set and execute
various functions.
5-1-1. Buttons
1) Assign functions to buttons (change assignments)
To use buttons on the remote control panel, assign functions to the buttons in the
[Web-based Control: Assign Function page].
Any function can be assigned to any button except CANCEL, PAGE A, PAGE B, UP, DOWN
and ENTER. Normally, assign functions via Web-based Control.
How to Assign Functions to Buttons
(1) Click a remote control unit to display the menu tree in the left pane. Click [Assign Function]
to display the Assign Function page in the right pane.
(2) Select a page, button and function to be set. Buttons can be selected under Button ID or
by pressing buttons on the remote control image.
(3) Set the relevant parameter(s) according to the function.
(4) Press [Send] to apply the button assignment.
MFR-39RU units allow you to assign functions in the "SETTING > BTN ASSIGN" menu.
See section 5-3-3-12. "BTN ASSIGN" for details.
MFR-18RU units allow you to assign sources to Source buttons.
See section 5-3-2. "Mode Menu" for details.
MFR-16RUD units allow you to assign functions using the display.
See section 5-4-2. "Button Assignment Change" for details.
2) Press buttons to execute functions
Press a button to execute the assigned function. Button LED indication, NAME DISPLAY,
MENU and display will change according to the assigned function.
39