Advertisement
VARIOUS MICROSCOPY PROCEDURES
· Using the BX2 software for PC (CD-ROM), control the filters from your PC. (automatic switching/programmed control)
· Perform required assignment to the buttons of the U-HSTR2 hand switch and control the filters from the hand switch.
ASSEMBLY
}When connection of all cables including that of the filter wheel have completed, bundle the cables using the cord clamps
provided with the BX-UCB so that they do not come in the way of operation.
Fig. 1
1
Inserting the Filters in the Filter Wheel
@
}With the U-FWT, the function of the U-UCD8A motorized condenser can
be extended by attaching the U-FWCO1.25X low-magnification correction
lens and U-FW32PO polarizer in addition to the filter wheel.
1. Loosen the 4 filter wheel cover clamping screws @ using the Allen screw-
driver provided with the microscope, then remove the cover.
}Filters with up to 32 mm diameter (25 mm filters can also be acceptable by
using conversion adapters*) and 6 mm thickness can be mounted on the
filter wheel. The orientation of each push ring should be determined ac-
cording to the filter thickness as shown in the table on the next page.
U-FWT/FWR/FWO
(Figs. 1 & 2)
4
Advertisement
