AESA
4—1 Assembly Diagram
* Assemble each component in the order of the numbers, taking care to keep all glass surfaces clean and avoid
scratching the lens surfaces.
Objective ©
©
Eyepiece
Observation tube
SA
|
s
u
=
=
Mechanical stage
自
|
F
Microscope
I
stand
Condenser E
[==
Filter (32.5 mm dia.)
$
Митог
ο.
Filter
holder
4-2
Explanation for Assembly Procedure
1) Loosen the clamping screw (© fully, and mount the observation tube
on the circular dovetail mount. Reclamp the screw @ to securely hold
the observation tube on the stand. (Fig. 1)
2) The observation tube can be normally mounted on the stand with the
eyepiece tube(s) pointing backward the microscope so that the observer
can look into the eyepiece(s) over the pillar to utilize available light as
much as possible; however, the observation tube can be clamped at any
direction to the observer preference or convenience.
Insert the eyepiecels) into the eyepiece tube(s) 2).
(Fig. 1)