2.3.2 Viewing Stored Recordings
1. Set the rotary switch to MR.
2. The instrument displays the last recording stored in the instrument. The
secondary (top) display indicates the memory location; while the main
display indicates the measured value.
To see the other measurements, press the button. The record number
is decremented and the corresponding measurement is displayed.
3. To scroll rapidly through the recorded measurements, keep the button
pressed.
4. To select a specific recording, use the button to change the recording
number.
5. Once you select the recording number, you can see all information
associated with the measurement. Press the MEM button for >2
seconds, then use the button to scroll the information.
6. When finished viewing recordings, press MEM for >2 seconds.
Megohmmeter Model 6522/6524
OFF
V
Ω
Ω
k
MR
MEM
Ω
M
50V
100V
250V
500V
1000V
M
27