2
press
nd
on
3
press
rd
on
4
press
th
on
5
press
th
on
6
press
th
on
2.1.2 Alarms
The instrument includes an alarm function that sounds an audible buzzer when a
defined alarm condition is measured. Alarm features are model-dependent (see
below).
2.1.2.1 Activating/Deactivating the Alarm Function
Model 6522:
TEST
The alarm is available in continuity testing mode. Pressing
the TEST button activates the alarm. The
on the LCD, along with the threshold value (2Ω). If the
measurement is below this threshold and the buzzer is active,
the instrument emits an audible signal.
Automatic switching to standby
mode is activated. To deactivate it:
1. Press to select OFF (the
2. Press to change the
3. Press to validate the
P
P
The
display when you exit Set-Up.
Note that this setting reverts to OFF
when you turn OFF the instrument.
Displays the instrument model
number.
Displays the instrument firmware
version.
Displays the instrument hardware
version.
Return to the first press.
setting blinks).
setting to On.
change.
symbol appears on the
symbol appears