Overview Of Cli Storage Configuration Procedures - HP StorageWorks MSA1000 Software Manual

Overview of CLI storage configuration procedures

When using the CLI to initially configure the MSA controller and its storage, use the following sequence:
1. Create the LUNs.
See "LUN-related commands" on page 25
NOTE:
name or ID to a
2. Enter array controller settings, including global parameters.
See "Global commands" on page 35
NOTE:
"Setting the controller ID" on page 36
3. Enter connection information about the HBAs with access to the MSA.
See "Host connection commands" on page 40
NOTE:
"Changing the profile of a connection" on page 41
4. (Optional) Limit access to the storage.
See "Access Control List
OpenVMS environments must assign a unique ID number to each LUN. See
LUN" on page 28 for instructions.
OpenVMS environments must assign a unique ID number to each array controller. See
Each host accessing the storage must identify its operating system (profile type.) See
commands" on page 43 for command descriptions.
HP StorageWorks 1000/1500 Modular Smart Array Command Line Interface user guide
for command descriptions.
for command descriptions.
for instructions.
for command descriptions.
for instructions.
"Assigning a
13