Installation Procedures - HP StorageWorks XP48 Configuration Manual

Installation procedures

18
Perform these actions to set up the disk array:
1. Install and configure the disk array (page 19)
• Setting the System Option Modes
• Configuring the Fibre Channel ports
2. Install and configure the host (page 24)
• Loading the OS and software
• Installing and configuring the HBAs
• Clustering and fabric zoning
3. Configure FC switches (page 27)
• Defining the paths
4. Connect the disk array (page 29)
• Verifying disk array device recognition
5. Configure disk array devices (page 30)
• Initializing and label the devices
• Mounting the devices
• Verifying file system operation
HP StorageWorks Disk Array XP Operating System Configuration Guide: OpenVMS