Sample Site Inspection Checklist - HPE BL860c i2 Getting Started Manual

Non-operating
Relative humidity (noncondensing)
Operating
Non-operating
1
All temperature ratings shown are for sea level. An altitude derating of 1° C per 304.8 m (1.8° F per 1000
ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating limit is 3,048 m (10,000
ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or 30.3 KPa/4.4 psia.
2
Storage maximum humidity of 95% is based on a maximum temperature of 45° C (113° F). Altitude
maximum for storage corresponds to a pressure minimum of 70 KPa.
For more information on the c-Class enclosures, go to
bladesystem/enclosures.
For more site preparation information, go to http://www.hpe.com/info/Blades-docs,
select HPE Integrity BL860c i2 Server Blade or HPE Integrity BL860c i4 Server
Blade in the list of servers, and then select the Generalized Site Preparation
Guidelines.

Sample Site Inspection Checklist

Table 3 Customer and Hewlett Packard Enterprise Information
Customer Information
Name:
Street address:
State or province:
Zip or postal code:
Primary customer contact:
Secondary customer contact:
Traffic coordinator:
Sales representative
Representative making survey
Scheduled delivery date
Table 4 Site Inspection Checklist
Check either Yes or No. If No, include comment number or date.
Computer Room
Number Area or condition
1. Is there a completed floor plan?
2. Is adequate space available for maintenance needs? Front
36 inches (91.4 cm) minimum and rear 36 inches (91.4
cm) minimum are recommended clearances.
3. Is access to the site or computer room restricted?
38.7º C (101.7º F)
2
20% to 80%
5% to 95%
Phone number:
City or Town:
Country
Phone number:
Phone number:
Phone number:
Hewlett Packard Enterprise information
Order number:
Date:
http://www.hpe.com/servers/
Comment or
Date
Yes No
8