Installing The Server Blade Into The Enclosure; Installation Sequence And Checklist; Installing And Powering On The Server Blade; Preparing The Enclosure - HPE BL860c i2 Getting Started Manual

3 Installing the server blade into the enclosure

Installation sequence and checklist

Step Description
1 Perform site preparation (see
2 Unpack and inspect the server shipping container and then inventory the
contents using the packing slip.
3 Install additional components shipped with the server. For these procedures,
see the documentation that with the component or the user service guide.
4 Install and power on the server blade.
5 Configure iLO 3 MP access.
6 Access iLO 3 MP.
7 Access UEFI from iLO 3 MP.
8 Download latest firmware and update using HP Smart Update Manager
9 Install and boot the OS.

Installing and powering on the server blade

Preparing the enclosure

BladeSystem enclosures ship with device bay dividers to support half-height devices.
To install a full height device, remove the blanks and the corresponding device bay
divider.
CAUTION:
server blade or the enclosure unless all hard drive and device bays are populated
with either a component or a blank.
1. Remove the device bay blank.
2. Remove the three adjacent blanks.
"Site preparation" (page 7)
To prevent improper cooling and thermal damage, do not operate the
Completed
for more information).
13