Table of Contents
Advertisement
3.
Install the server blade.
The server blade should come up to standby power. The server blade is at standby
power if the blade power LED is amber.
Server blade power states
The server blade has three power states: standby power, full power, and off. Install
the server blade into the enclosure to achieve the standby power state. Server blades
are set to power on to standby power when installed in a server blade enclosure.
Verify the power state by viewing the LEDs on the front panel, and using
Table
5.
19
Advertisement
Table of Contents
Need help?
Do you have a question about the BL860c i2 and is the answer not in the manual?