Table of Contents
Advertisement
8.3
Parameter level
At the parameter level it is possible to con-
figure general parameters.
From the operating level, the parameter lev-
el is reached by simultaneously pressing
h
R
keys
+
, from the configuration level 1
e
by pressing the
The parameter level covers the following pa-
rameters:
- language
- date and time
- summer time
- display brightness
- relay limit settings
- dispaly time
If an incorrect codenumber is en-
tered, the recorder remains in nor-
mal operation. Signal acquisition,
processing and recording remain
activated.
The parameters can be viewed but
can not be programmed.
Following entry of a correct
codenumber the normal operation
is interrupted.
There is no signal acquisition,
processing or recording.
The relays of the external relay
module ER8 remain in their current
status. They are only operated
again when the recorder is at the
operating level or in the basic sta-
tus.
Display
P-LEVEL
8 Programming
key.
Edit
Selection/input
with keys Enter
55
Continue with
h
forwards
R
backwards
Advertisement
Table of Contents
