Table of Contents
Advertisement
Parameter level
The parameter level is protected by a code-
number to prevent unauthorised access.
H
There are two different
codenumbers:
- Codenumber for limited
parameter set
- Codenumber for complete
parameter set
Section 8.2.4
Section 12.6
If a wrong codenumber is input, the individ-
ual parameters can be viewed, but not pro-
grammed.
Following input of the correct codenumber,
the recorder interrupts signal acquisition
and recording at this level. Statistical reports
are re-started on leaving the parameter level.
Section 7.9
The following parameters are altered at the
parameter level:
- language
- date and time
- summer time
- display brightness
- relay limit
- display time
6 Preparation
23
Advertisement
Table of Contents
