JUMO LOGOLINE 500d Operating Manual page 37

Example:
a) upper chart
- channel 1
- range: 0 — 100 mm
- relay limits at 200 and 500 °C
b) lower chart
- channel 2
- restricted range: 50 — 100 mm
- relay limit at 300V
Triggered scaling print-out
To start the triggered scaling print-out the
F
key must be held down for at least 4 sec.
Alternatively, the triggered scaling print-out
can be started using a logic input.
The print-out covers the scaling of all chan-
nels whose writing status is switched on.
Print-out follows the same arrangement as
described under "cyclic scaling print-out".
7 Text printing
-200.0
Ch.1 (blue):
Ch.2 (red):
-20.00
Ch.3 (green): Outside temp.
Ch.2 (red):
-200.0
Ch.1 (blue):
37
+325.0
Furnace 1 °C
+200.0 +400.0
Generator V
+40.00
°C
+200.0
Generator V
+325.0
Furnace 1 °C
+850.0
+400.0
+850.0