Table of Contents
Advertisement
Text printing in the trace overwriting
mode ( Section 7.2) may take a
very long time.
In order that the chart speed
change is not delayed, the priority
of texts printed in this mode should
be lower than the priority of the
chart speed change.
The line to mark the type of speed
change is printed even when the
corresponding text can not be printed.
This is the case when the setup pro-
gram has been configured under
Edit: Print out texts in Print mode
"Process value overwrite" for Text
on Change of Chart Speed and
when a chart speed of zero or greater
than 360mm/h is set.
Text printing in the trace interrupting
mode ( Kapitel 7.2) is relatively
quick.
In order to prevent the printing of
texts in this mode being aborted
through a chart speed change, the
priority of these texts should be
higher than the priority of the chart
speed change.
7 Text printing
39
Advertisement
Table of Contents
