Table of Contents
Advertisement
- When inserting the chart cassette, take
care that it is centered on the tear-off
edge and – guiding it with the thumb and
index finger – insert it into the cassette
slot and push it up gently, until the
holding/ejector catch snaps into position.
- When the cassette has been inserted, the
paper feed should immediately take up
the slack in the paper (about 10mm
feed).
- If the paper feed does not start up, then
the cassette will have to be removed and
replaced in the correct position.
- Check that the holding catch is in the
final (latched) position.
9 Consumables
107
Advertisement
Table of Contents
