Maths And Logics Module - JUMO LOGOLINE 500d Operating Manual

10.5 Maths and logics module

If the maths and logics module is deactivat-
ed, the signals measured at the signal in-
puts are recorded in accordance with the
configuration of the signal inputs. If the
maths and logics module is activated, the
measured signals can be mathematically
linked.
Example:
The sum/difference of two inputs is record-
ed on one channel. Simultaneously, on an-
other channel, a maximum value is record-
ed for as long as a specific logic input is
open. Closing the logic input resets the
maximum value recording.
Thanks to the many functions, operators
and variables which are available for the
maths module, an individual adjustment to
the requirements of the task can be made in
most cases.
On request, customized maths programs
can be set up in the main factory.
The setup program is used to transfer these
programs to the recorder.

If the maths and logics module is
switched on, the recorder response
can be fundamentally changed.
The information given in the Oper-
ating Manual can then be partially
invalid.
10 Extra Codes and accessories
117