Table of Contents
Advertisement
12.4 Status messages
The following status messages are indicat-
ed on the matrix display:
Display
INITIALISING
STOP
EXTERNAL STOP
SETUP
PLEASE WAIT!
12 Appendix
Description
The recorder is being initialised. Please wait.
The recorder is in the Stop status because key
S
has been pressed.
The recorder is in the Stop status because external stop has
been activated by closing the appropriate logic input.
The setup connector has been plugged into the recorder.
The recorder is ready for communication with the PC connected
to it.
The configuration data are being written to EEPROM.
During this time the recorder does not respond to any inputs.
128
Advertisement
Table of Contents
