Setting Media; Loading Roll Media - MUTOH VJ-1304 Quick Reference

VJ-1304 QUICK REFERENCE
3.5

Setting media

This section explains how to set media and settings for each media type.
NOTE NOTE
• Refer to the following for details about handling media.
"4.2 Media" in the Operation Manual
• Refer to the following for types and details of recommended media.
"4.2.1 Media type" in the Operation Manual
"8.3 Options/Supply list" in the Operation Manual
3.5.1

Loading roll media

This section explains how to load roll media.
Use the exclusive scroller included with this printer for loading roll media.
NOTE NOTE
• The following roll media can be set on the scroller included with this printer.
• Media tube diameter: three inches, outside diameter of media: 150 mm or less, weight: 19 kg or
less
Follow the procedure below to load roll media.
CAUTION
• Load roll media on an even surface such as a desk.
If you load roll media with the scroller standing vertical, there is a possibility that
the scroller might get damaged.
1. Load roll media to the scroller so that it is rolled in an anti clockwise direction when viewed from
the fixed flange.
3-13
3 Basic usage