Cleaning The Cleaning Wiper - MUTOH VJ-1304 Quick Reference

VJ-1304 QUICK REFERENCE
NOTE NOTE
• If blurs or lacking parts in printed media do not disappear with one time of Head cleaning,
perform Strong cleaning.
• If blurs or lacking parts in printed media do not disappear with several times of Head cleaning,
refer to "5 Troubleshooting", and take appropriate measures.
4.2.4

Cleaning the cleaning wiper

This sub-section describes how to clean the cleaning wiper.
(1) Cleaning time
Once a week, or when blurs or lacking parts appear on printed media after Head cleaning.
(2) Cleaning method
Follow the procedure below to clean the cleaning wiper.
NOTE NOTE
• Use the poly-knit wiper to clean the cleaning wiper.
For the poly-knit wiper, refer to "8.3 Options/Supply list" in the Operation Manual.
1. If the printer is turned ON, make sure the following.
• Printing or other operations are not in progress.
• The operation panel display is Normal.
2. Display the CR Maintenance menu on the operation panel.
a. Press the [Menu] key on the operation panel.
• "Menu 1: Setup>" is displayed on the operation panel.
4-11
4 Daily maintenance